Remote Engineering & Construction roles
Hire a dedicated
Electrical Estimator
from the Philippines
Get a top-tier Electrical Estimator for a fraction of your local hiring costs. GoTeam finds and vets the right talent for you, equips them with AI, and handles any admin required. So you get bid-ready electrical estimates on time, and protect your margin on the work you win.
Book a call with our team
The hardest part of an electrical bid isn’t the takeoff
Every electrical bid rests on prices, specs, and counts that can change at any stage. Copper and aluminum prices can shift between the takeoff and the deadline. A code revision can change your conduit or protection requirements after your price is already committed. And a missed device count can go unnoticed until rough-in day, when it’s too late to reprice.
That’s why getting it right demands precision: taking off every fixture, panel, and conduit run from the drawings, pricing each one to current material and labor rates, and checking every line against the specs before the bid goes out.
A GoTeam Electrical Estimator owns that work end to end, from the Philippines, as a permanent part of your estimating team. They learn your rates, your suppliers, and your preferred installation methods, so every estimate reflects how your business actually bids.
What our Electrical Estimators
are accountable for
Most offshore hires are measured by hours. At GoTeam, our Electrical Estimators are measured by outcomes, set as clear objectives and tracked as results. Here are the three they own.
Objective 1
Delivering accurate, bid-ready electrical estimates on time
- Taking off every device, fixture, panel, and conduit run from the drawings, so nothing is missed when your bid goes out
- Pricing each item against your labor units and material rates, and closing every estimate within your bid deadlines
- Holding estimate accuracy within ±3% of final project cost, and tracking every job against actuals at completion
Objective 2
Keeping material and subcontractor pricing current and competitive
- Updating wire, cable, fixture, and equipment rate libraries to within 30 days, so no estimate carries outdated numbers
- Leveling vendor and subcontractor quotes for spec compliance, scope gaps, and exclusions before any number carries into the estimate
- Maintaining structured quote logs organized by system and supplier so your team never prices from old or missing numbers
Objective 3
Catching scope gaps and code conflicts before they reach your bid
- Reviewing every drawing revision, addendum, and spec change against the estimate, so no update slips through between versions
- Flagging drawing conflicts, NEC or AS/NZS 3000 compliance gaps, and scope omissions through structured RFIs before submission
- Recording every pricing assumption, inclusion, and exclusion so the estimate holds up at bid review and project handover
Powered by OKRx, our AI-powered execution system. OKRx sets your estimator’s 90-day targets and tracks them daily on a live scoreboard, so the outcomes that matter to you are the ones they’re working toward.
How our Electrical Estimators build accurate, competitive bids
Every GoTeam Electrical Estimator works with a library of Claude Skills we designed for estimating, and our suite of AI tools. With these, running electrical takeoffs, leveling quotes, and reading specs take a fraction of the time, so your estimator covers more ground and focuses on the judgment calls that protect your margin.
Here's each 
Claude skill at work:
Electrical takeoffs
Every device, fixture, panel, and conduit run in your drawings has to be counted and measured before it can carry a price, and doing it by hand can take days. So your estimator runs the takeoff with Claude, inside tools like Bluebeam Revu, to get through more bids in less time and get every number right.
Scope and spec reviews
Electrical specifications can be hundreds of pages, each full of voltage ratings, fire alarm requirements, and grounding details that are easy to miss and expensive to get wrong. So your estimator runs through every page with Claude, catching scope gaps and spec conflicts before they become your problem on-site.
Subcontractor quote leveling
Two electrical subcontractors can quote the same job with completely different scope: one could include every fixture and device, the other could stop at rough-in. Which means a lower price doesn’t always mean a better deal. So your estimator levels every quote with Claude against the full set of drawings, making the best value easy to tell apart.
Cost breakdown and pricing
Every line item in an electrical estimate needs current pricing for wire, cable, fixtures, and labor, and those numbers change all the time. So your estimator builds each breakdown with Claude from your supplier quotes and rate libraries, then pressure-tests every total against what comparable jobs have actually cost.
Bid assembly
An electrical bid is a package: a cost breakdown, completed bid forms, alternates, unit prices, and backup documentation. And it all has to tell the same story as the estimate, or the first thing an evaluator sees is a gap. So your estimator assembles and cross-checks every component with Claude against the estimate, before your bid goes out.
RFIs and documentation
Electrical drawings and specs don’t always agree, and on a complex project, that can mean dozens of formal questions to the design team that all need answers in writing before your bid can go out. So your estimator drafts each RFI with Claude, clear enough to get the right answer back the first time.
What this means for your bid pipeline
With AI handling the repetitive work, your GoTeam Electrical Estimator doesn’t just do the same job faster. They take on more bids, and win more work.
Over 170 companies across
15+ industries have grown their teams with us
Ready to hire your Electrical Estimator?
Speak with our team→Your tools, your standards,
your way of working
Your GoTeam Electrical Estimator isn’t someone you have to build your process around. They work in the software you already use, and to the codes and standards your electrical projects demand. From day one, they fit how your business runs.
Your tools
The software your team works in, Accubid, ConEst, Bluebeam Revu, PlanSwift, AutoCAD, and Excel, is software your Electrical Estimator already knows. Which means they’re able to pick up your templates, rate libraries, and assemblies fast. There’s nothing to install and nothing for your team to change.
AS/NZS 3000
Your standards
Every GoTeam Electrical Estimator is screened against US codes and standards, including NEC, NFPA, OSHA, and local AHJ requirements, and is equally fluent in Australian and New Zealand standards, including AS/NZS 3000 (Wiring Rules), if you work across those markets. So the estimate you get is built to the codes your project runs on, not a one-size-fits-all template.
You lead them.
We handle the rest.
Your Electrical Estimator is a dedicated member of your team. You set their priorities, include them in your meetings, and direct their work like any other member of your staff. Everything else is handled by us. So you get a real teammate, without the cost and overhead of a local hire.
Setup
Because we handle the recruiting, vetting, equipment, and IT before they start, your estimator is ready to get to work on your projects within two weeks, not the months a local hire takes. And we don’t just hand them over. We work alongside you to settle them fully into your team, over their first 90 days.
Security
Your drawings, pricing, and client data stay protected, wherever your estimator works. We monitor their systems, manage their access, and secure their devices with endpoint and data-loss protection. For highly confidential work, we even place your Electrical Estimator in a secure GoTeam-managed office in Cebu.
Frequently asked questions
How much does it cost to hire an Electrical Estimator through GoTeam?
Most clients save up to 75% with GoTeam versus an onshore hire, and the reason is the structure: you just need to cover your Electrical Estimator’s salary, set at the Philippine market rate with no markup, plus a single monthly fee that covers their equipment, office, IT, security, and management. To see what that looks like for your business, talk to one of our staffing specialists.
Can I hire just one Electrical Estimator, or do I have to commit to a whole team?
You can start with a single Electrical Estimator. Most of our clients do. Then grow your estimating team as your project pipeline grows, exactly how InCharge went from one role to a full pre-construction team of 35. There’s no minimum team size to begin.
What’s the difference between an Electrical Estimator and a Construction Estimator?
An Electrical Estimator handles the electrical scope of a project: the wire, conduit, panels, fixtures, installation methods, and the codes and pricing that come with electrical work. A Construction Estimator handles the full-scope bid across all trades. On a large multi-trade project, the two work together, with the Electrical Estimator producing the electrical package that feeds into the overall bid. For an electrical contractor bidding their own work, the Electrical Estimator owns the entire bid, from takeoff through submission. GoTeam staffs both.
Is hiring a dedicated Electrical Estimator the same as outsourcing my estimating?
No. When you outsource estimating, you send drawings to a service, they price the job from their own cost data and templates, and you get a number back that someone on your team still has to check against your actual supplier pricing, your labor rates, and your bid conditions before it goes out the door. A dedicated Electrical Estimator through GoTeam handles that work internally. They work in your estimating software, price from your cost database, use your assemblies and your supplier contracts, and learn how your business bids. They’re not handing you a number to check. They’re building the number you bid.
Can a GoTeam Electrical Estimator own the full bid for an electrical contractor?
Yes. If you’re an electrical contractor bidding your own projects, your GoTeam Electrical Estimator owns the entire bid from takeoff through submission: quantifying the electrical scope, pricing materials and labor, managing vendor and subcontractor quotes, and assembling the final number your business bids with. If you’re a larger construction company where the electrical work is one package within a multi-trade bid, they produce the electrical estimate that feeds into the overall submission. Either way, your GoTeam Electrical Estimator owns the estimating from day one.
What project types do your Electrical Estimators work on?
GoTeam Electrical Estimators work across commercial, industrial, residential, and high-voltage electrical projects. That includes office fit-outs and retail, warehouses and manufacturing facilities, multi-family residential developments, and large-scale power distribution and ASP1 installations. If your pipeline calls for a specific type of electrical estimating experience, let our team know and we’ll match you with someone who has it.
Do your Electrical Estimators have electrical engineering degrees?
Many do. It’s one of the qualifications we screen for most in this role, because an Electrical Engineering degree means your estimator doesn’t just read the drawings. They understand the systems behind them: how circuits are designed, why certain materials are specified, and what the codes require. If a specific qualification matters for your role, whether that’s an EE degree, a PRC engineering license, OSHA certification, or LEED accreditation, let our team know and we’ll match accordingly.
What software do GoTeam Electrical Estimators use?
Your Electrical Estimator works directly in the tools your team already uses. For electrical-specific estimating, that means Accubid and ConEst, the platforms built for assembly-based electrical takeoffs. For plan review and general takeoff work, Bluebeam Revu, PlanSwift, and AutoCAD. And Excel, where most pricing, comparison, and bid-summary work happens. They also pick up the specific templates, rate libraries, and assemblies you’ve built, so there’s nothing new for your team to install or learn.
Which electrical codes do your Electrical Estimators work to?
Every GoTeam Electrical Estimator is screened against US codes and standards, including NEC, NFPA, and OSHA, as well as local AHJ requirements. For clients in Australia and New Zealand, they’re equally prepared for AS/NZS 3000 and Safe Work Australia standards. The codes your project answers to are the codes your estimator works to.
How does a GoTeam Electrical Estimator keep estimates accurate?
Every estimate is checked twice. Your Electrical Estimator first works through the takeoff and pricing with Claude, catching missed scope, wrong quantities, and anything that doesn’t add up. Then they apply the judgment only a human can: checking material selections against the spec, verifying labor rates against the project conditions, and confirming the estimate is right. There are two passes, one by AI, one by a professional who knows electrical work.
What does an offshore Electrical Estimator do?
Everything a local Electrical Estimator does. They read your electrical drawings, run your takeoffs, price materials and labor from your rates, manage vendor and subcontractor quotes, and assemble your bids or electrical packages for submission. And with GoTeam, they do it as a full-time, dedicated member of your team who works your hours, in your software, to your standards. They’re not an external service. They report to you.
Which countries does GoTeam serve for electrical estimating?
GoTeam places Electrical Estimators for clients across the United States, Australia, Canada, the UK, and New Zealand, each screened to the electrical codes and standards those markets require. Based somewhere else? Book a call with our team and we’ll walk you through how we can support your market.
Will my Electrical Estimator work in my time zone?
Yes. Your Electrical Estimator works your hours, in your time zone, so they’re online when your team is for real-time collaboration, live questions, and same-day turnaround on bids.
How quickly can a GoTeam Electrical Estimator start?
We handle the sourcing, vetting, and setup, so your Electrical Estimator is ready to start on your projects within about two weeks. The exact timeline depends on how specialized the role is, which we’ll map out with you on our first call.
Is the Electrical Estimator I hire with GoTeam fully dedicated to us?
Yes. Your Electrical Estimator works only for you, as a permanent member of your team. You set their priorities, assign their projects, and direct their work. GoTeam handles everything that comes with employing them, from recruiting and equipment to IT and management.
What if the Electrical Estimator you place isn’t the right fit?
Your satisfaction is what we’re measured on. If the fit isn’t right, we’ll make it right, including replacing your Electrical Estimator at no extra cost. Our job is to get you the right person at the right cost, not just anyone who can do the job.
Is my project data secure with an offshore Electrical Estimator?
Yes. Your drawings, pricing, and client data are protected by monitored, access-controlled systems with endpoint security and data-loss protection, wherever your Electrical Estimator works. For your most sensitive projects, we can even place your Electrical Estimator in a secure GoTeam-managed office in Cebu.
Do you staff different types of Electrical Estimators, like Commercial, Industrial, or MEP?
Yes. GoTeam staffs Electrical Estimators across project types and experience levels, including commercial electrical estimators, industrial electrical estimators, high-voltage and substation work, MEP estimators with an electrical focus, and dedicated electrical takeoff specialists. We also match by seniority, from junior estimators handling high-volume takeoff work to senior estimators who manage full bid pipelines and pre-construction cost engineering. If your work calls for a specific combination of project type, tools, and experience, tell our team on the first call and we’ll match you with the right estimator.
Need more construction talent from GoTeam?
Whatever your pre-construction team needs, we can fill it with trusted GoTeam specialists who are screened, AI-skilled, and managed the way your Electrical Estimator is.
Start with the role you need most.
Add the rest as you grow.
Let's find your
Electrical Estimator
One call is all it takes to start. Tell us about your projects, and we’ll match you with the right estimator and walk you through the cost and the timeline to get them on your team.